GreenConserve
water

How to Save Water at Home, Ranked by Gallons Saved

A hand turning off a chrome bathroom faucet handle to stop the flow of water
Photo by MART PRODUCTION on Pexels

The fastest way to cut a water bill is to work in order of gallons saved, not in order of what feels virtuous. Fix running toilets and dripping faucets first, since EPA WaterSense puts the average home’s leaks at close to 11,000 gallons (41,600 liters) wasted a year. Then replace an old toilet, which can save up to 13,000 gallons (49,200 liters) a year on its own. Shorter showers, efficient laundry and a smarter irrigation schedule matter too, but they save hundreds to a few thousand gallons a year each, not tens of thousands. The table below ranks the fixes so you can start with the one that actually moves the bill.

Where does household water actually go?

Indoor water use breaks down differently depending on which study you read. Older research and EPA WaterSense materials generally put toilets first, at roughly a quarter of indoor use, with showers and laundry close behind and faucets and leaks making up the rest. The US Geological Survey’s Water Science School, by contrast, has reported faucets as the largest single indoor category in some surveys, with clothes washers and showers close behind. The disagreement matters less than it looks: across every version, toilets, showers, faucets and laundry together account for the large majority of what happens inside the house, and leaks are a hidden add-on on top of all of them. Outdoors is a separate story. EPA WaterSense estimates outdoor use averages more than 30 percent of total household water, and can reach 60 percent in arid regions during the growing season, mostly from lawn and garden irrigation.

What uses the most water in a home?

By volume, the biggest single opportunity in most houses is still the combination of leaks and an old, inefficient toilet, because both run whether or not anyone is paying attention. A single running toilet can wipe out every gallon saved by a shorter shower in the same week. After that, showers and the clothes washer are the two fixtures people use often enough that a small per-use saving adds up over a year, while faucets save the least per fixture simply because each use is short.

FixTypical savingsSource
Fixing household leaks~11,000 gal (41,600 L) a year, average homeEPA WaterSense
Replacing an old toilet with a WaterSense model (1.28 gal/flush)Up to 13,000 gal (49,200 L) a yearEPA WaterSense
WaterSense irrigation controllerUp to 15,000 gal (56,800 L) a year, up to 30% less outdoor useEPA WaterSense
WaterSense showerhead~2,700 gal (10,200 L) a yearEPA WaterSense
ENERGY STAR certified clothes washer~20-33% less water per load than a standard washerENERGY STAR
WaterSense faucet or aerator~700 gal (2,650 L) a yearEPA WaterSense

Fix the leaks first

A leak is the only item on this list that wastes water around the clock with no benefit to anyone, which is why it belongs at the top regardless of the household’s habits. According to EPA WaterSense, about 10 percent of homes have leaks that waste 90 gallons (340 liters) or more every day, and most of that comes from three unglamorous culprits: a worn toilet flapper, a dripping faucet, and an irrigation valve that no longer seals. A faucet dripping once a second alone wastes more than 3,000 gallons (11,350 liters) a year. Start with the ten-minute toilet dye test and the repair steps in how to fix a running toilet, then work through how to fix a leaky faucet for the compression, cartridge, ball or ceramic-disc repair that matches your fixture. If you are not sure where the leak is, the water-meter test and room-by-room checklist in how to find a water leak will narrow it down before you buy any parts.

Does a low-flow toilet actually save water?

Yes, and by more than most other single fixture swap on this list. Toilets made before the mid-1990s commonly use 3.5 to 7 gallons (13 to 26 liters) per flush; a WaterSense-labeled toilet uses 1.28 gallons (4.8 liters) or less and still clears the bowl in one flush, thanks to redesigned bowl geometry and trapways rather than just a smaller tank. EPA WaterSense estimates that replacing an old toilet with a WaterSense model can cut a home’s toilet water use by 20 to 60 percent, saving up to 13,000 gallons (49,200 liters) a year. A showerhead swap is a smaller but still worthwhile step in the same category: a WaterSense showerhead uses 2 gallons (7.6 liters) a minute or less, against 2.5 gallons (9.5 liters) for a standard head, and EPA WaterSense puts the typical household saving at about 2,700 gallons (10,200 liters) a year, with no noticeable drop in pressure for most people.

Laundry, dishwashing and faucets

A full-sized ENERGY STAR certified clothes washer uses roughly 20 to 33 percent less water per load than a standard model, according to ENERGY STAR, mostly by sensing load size and using a more efficient wash motion instead of filling a fixed tub every time. The saving compounds because an efficient washer also uses less hot water, cutting the water-heating energy bill alongside the water bill. Running only full loads, in both the washer and the dishwasher, does more than switching detergents or adjusting temperature. A dishwasher, used with full loads and no pre-rinse under the tap, typically uses less water than washing the same dishes by hand under a running faucet. Faucets themselves save the least in absolute terms, about 700 gallons (2,650 liters) a year from a WaterSense-labeled faucet or aerator, but the parts cost a few dollars and the installation takes minutes, which makes the payback close to immediate.

Is outdoor watering worth fixing too?

In many homes, yes, more than any single indoor fixture, because outdoor use is seasonal and easy to over-apply without noticing. EPA WaterSense reports that a WaterSense-labeled irrigation controller, which adjusts watering to weather and soil conditions instead of running a fixed schedule, can cut an average home’s outdoor water use by up to 30 percent and save up to 15,000 gallons (56,800 liters) a year. Extension research backs up the cheaper half of that advice even without new hardware: NC State Extension recommends watering lawns and gardens deeply and infrequently rather than lightly every day, since deep watering pushes roots further into the soil and makes the lawn more drought-tolerant, and recommends watering in the early morning to cut evaporation loss from wind and heat. Swapping overhead sprinklers for drip irrigation or soaker hoses in garden beds saves water for the same reason a controller does: the water goes to the root zone instead of the air and the surrounding pavement.

A garden sprinkler running on a lawn in daylight
A fixed sprinkler schedule is one of the easiest places to overwater without noticing. Photo by Sóc Năng Động on Pexels

Collecting rainwater adds a free supply on top of using less in the first place; sizing a barrel or tank to your roof area and local rainfall is covered in rainwater harvesting system, including how much a single storm can realistically fill.

How much water can a household realistically save?

Stacking the fixes above against the US Geological Survey’s estimate of roughly 80 to 100 gallons (300 to 380 liters) of indoor use per person per day, a household that fixes its leaks, replaces an old toilet and showerhead, and adjusts its irrigation schedule is realistically looking at 20,000 to 30,000 gallons (75,700 to 113,600 liters) saved in the first year, with leaks and the toilet swap doing most of that work. None of it requires a sacrifice in comfort: a WaterSense toilet still clears on one flush, an efficient showerhead still feels like a shower, and a well-timed sprinkler keeps the lawn just as green with less runoff down the driveway. The practical order is simple: stop the water that is running for no reason, replace the two or three fixtures that use the most per use, then tune the watering schedule outside. Each step pays for itself faster than the one before it looks dramatic.

Sources